0.022" Slot
Accepts standard rectangular wires through to 0.019" × 0.025" finishing arches in the 0.022 sequence.
ORTHO SUPPLIES
Viking Store
Biocomfort Buccal Tube — Aditek | 1st Molar | 0.022" Slot
The Aditek Biocomfort Buccal Tube is a Brazilian-engineered molar attachment designed for the 1st molar position with a 0.022-inch slot. Its anatomic Biocomfort mesh base is contoured to follow natural molar anatomy, promoting reliable bonding across a range of molar morphologies. The low-profile design reduces soft-tissue irritation and improves patient comfort throughout treatment. Each case contains four tubes — upper right, upper left, lower right, and lower left — supplying a complete set for one patient. Manufactured in Brazil by Aditek, a company with a long-standing presence in the South American orthodontic market.
- 0.022" Slot
- 1st Molar Position
- Anatomic Mesh Base
- Low-Profile Design
- Brazilian Manufacture
- Full Patient Set (4 tubes)
Order via WhatsApp
Nationwide delivery · Direct confirmation by Viking Store
Clinical Confidence
Anatomic Base Engineering for Consistent Molar Bonding
The Biocomfort mesh base is shaped to approximate natural molar contour, which distributes adhesive stress more evenly across the bonding surface compared to flat base designs. For orthodontists who bond molars directly rather than banding, this anatomic geometry reduces the need for pad contouring and helps achieve consistent positioning across a range of molar shapes. The 0.022-inch slot accommodates standard rectangular wire sequences through to finishing arches.
Aditek developed the Biocomfort line specifically for direct-bond molar applications where low tissue profile and reproducible bond strength are priorities. The low-profile body minimises the lever arm on the bond during treatment mechanics and reduces mucosal impingement — a commonly cited patient comfort concern with higher-profile molar tubes. The four-piece per case configuration allows the practitioner to work from a single pack for a complete treatment unit.
Clinical Quality
Built for Professional Practice
Biocomfort Anatomic Mesh
Contoured to follow molar anatomy, distributing bond forces across the full base footprint.
Full Set Per Case
Each case includes all four quadrant tubes, ready for single-patient bonding without additional ordering.
- Brand Aditek
- Country of Origin Brazil
- Position 1st Molar
- Slot Size 0.022"
- Profile Low-profile
- Base Design Anatomic Biocomfort mesh
Engineering
Key Features
Anatomic Biocomfort Mesh Base
The base follows natural molar curvature, providing broad adhesive contact and reducing void formation under the tube during bonding.
Low-Profile Body
A reduced height profile limits soft-tissue contact and decreases the rotational moment on the bond during active archwire mechanics.
0.022" Slot
Compatible with the full range of rectangular wires used in standard 0.022 treatment sequences, from initial leveling through to finishing.
1st Molar Position Design
Tube geometry and base contour are sized for the 1st molar footprint, supporting accurate mesio-distal and bucco-lingual positioning.
Complete Four-Tube Case
UR, UL, LR, and LL tubes are packaged together, simplifying inventory and ensuring matched tube specifications across all four quadrants.
Professional Use Cases
Clinical Applications
Direct-Bond Molar Mechanics
Suited for cases where direct bonding to the 1st molar is preferred over banding, particularly in combination with a bonded bracket system on the premolars and anteriors.
Standard 0.022 Wire Sequences
Accommodates NiTi initial arches through stainless steel finishing wires in the 0.022-inch bracket system.
Why Choose
Why Choose This Product
- Brazilian Aditek manufacturing with established quality control for orthodontic attachments
- Biocomfort mesh base contoured to molar anatomy for consistent bonding surface contact
- Low-profile design addresses soft-tissue comfort without compromising tube function
- 0.022-inch slot compatible with widely used rectangular wire sequences
- Four-tube case format covers a complete patient without fractional ordering
- Direct-bond design suitable for practices that prefer bonded molar tubes over bands
Chairside Reference
Chairside Decision Guide
| Clinical Situation | Recommended Action |
|---|---|
| Slot System | Select this tube if your practice works in the 0.022-inch system. It is not compatible with 0.018-inch wire sequences. |
| Bonding vs. Banding | Designed for direct bonding to the molar surface. For patients requiring molar bands, a banded tube is the appropriate choice. |
| Case Quantity | Each case supplies one full patient set of four tubes. Order case quantities to match your active patient load. |
Technical Detail
Product Specifications
| Brand | Aditek |
|---|---|
| Country of Origin | Brazil |
| Molar Position | 1st Molar |
| Slot Size | 0.022" |
| Profile | Low-profile |
| Base Type | Anatomic Biocomfort mesh |
| Tubes Per Case | 4 (UR, UL, LR, LL) |
Clinical Workflow
Application Guidelines & Reference
Application Application Guidelines
-
1
Surface Preparation
Clean, dry, and condition the molar buccal surface according to your adhesive manufacturer's instructions before tube placement.
-
2
Adhesive Loading
Apply adhesive to the mesh base ensuring full coverage without excess that could flow into the tube slot during seating.
-
3
Positioning
Place the tube at the intended vertical and mesio-distal position on the 1st molar buccal surface, pressing firmly to seat the mesh base fully.
-
4
Light Curing
Cure according to the adhesive manufacturer's recommended exposure time. Ensure light access around the low-profile tube body.
Pairs With Best Used With
- 0.022" NiTi initial archwires
- 0.022" stainless steel finishing archwires
- Light-cured orthodontic bonding adhesives
- Matched 0.022" bracket systems on premolars and anteriors
Professional Dental Use Professional Use Notice
When bonding low-profile molar tubes directly, ensure the buccal surface is thoroughly dried and free of salivary contamination prior to adhesive application. The anatomic mesh base benefits from firm, even pressure during seating to achieve full base-to-enamel contact.
Viking Store
Biocomfort Buccal Tube — Aditek — Order at Viking Store
Selected by Viking Store for its anatomic Biocomfort mesh base and low-profile design, suited for direct-bond molar application in 0.022-inch bracket systems. Available nationwide across Egypt with direct WhatsApp order confirmation.
Order via WhatsApp- Nationwide Delivery
- Professional Dental Supplies
- WhatsApp Support
Why choose us?
Reason one
Exceptional Quality and Expertise: At our dental and orthodontics store, we provide top-tier products and services, backed by a team of highly skilled professionals. We ensure that you receive the highest quality dental and orthodontic solutions, designed to meet your specific needs with precision and care.
Reason two
Best Prices and Fast Delivery: We are committed to offering the best prices without compromising on quality. Additionally, our efficient processes guarantee fast delivery, ensuring that you receive your dental products and services promptly, so you can enjoy a healthy smile without delay.
wherever you are!
We will deliver to you With Bosta unlimited delivery
VIKING DENTAL STORE
AZARITA BRANCH
Azarita - In Front of Dentistry Faculty,
Alexandria University - Egypt
Saturday - Thursday, 8 am - 6 pm
Tap anywhere to open in Google Maps