Prosthetics
6g
Self-Etch Adhesive
Bottle 6g
Made in Liechtenstein
Tetric N-Bond Universal
Tetric N-Bond Universal is a light-curing, single-component adhesive for direct and indirect bonding procedures and all etching techniques1. Take advantage of the exceptional potential of this product and discover how easy it will make your work in the future.
Advantages
- Universally suitable for direct and indirect bonding procedures and all etching protocols
- High bond strength (> 25 MPa) on wet and dry dentin
- Minimal risk of postoperative sensitivity due to the integrated desensitizing effect
- Efficient VivaPen delivery form provides almost 3 times more applications per ml compared to conventional bottle
Efficient Esthetics
Tetric N-Bond Universal forms a part of the "Direct Restoratives" product category. The products of this category cover the procedure involved in the direct restoration of teeth – from preparation to restoration care. The products are optimally coordinated with each other and enable successful processing and application. You can find more information about the efficient workflow here.
Indications
- Direct-placed light-curing composite and compomer restorations.
- Direct-placed core build-ups with light-, self- and dual-curing composites.
- Repair of fractured composite and compomer restorations. Adhesive cementation of indirect restorations with light- and dual-curing luting composites
- Sealing of prepared tooth surfaces before temporary/permanent cementation of indirect resto-rations.
- Desensitization of hypersensitive cervical areas
Brand: ivoclar
Country of Origin: Liechtenstein
LITARK bonds extremely well with the cavity surfaces guaranteeing high non-permability and a mastication resistant stable filling. LITARK sets rapidly when in contact with saliva.
CHARACTERISTICS
Temporary filling cement, ready to use and extremely easy to apply.
It doesn’t contain eugenol. The product is characterized by high plasticity.
The improved viscosity ensures better workability, facilitating application.
LITARK adheres extremely well with the cavity surfaces with no need to add any further retentions.
The cavity does not need to be dried before application. All types of residues and other solutions must be completely removed from the cavity before applying the cement.
LITARK sets quickly on contact with saliva. Litark low solubility ensures impermeable, completely neutral fillings resistant to mastication. Litark is easy to remove and does not leave residues.
Brand LASCOD
Country of Origin Italy
5ml
FEATURE & BENEFIT
5th Generation Bonding System (2 bottles: Etch + Prime & Adhesive)One step priming & bonding
Superior bonding strength
Wet bonding type
APPLICATION
Bonding for direct composite, porcelain, composite, metal repair, set amalgam and indirect bonding procedures with Metacem adhesive resin cement
PHYSICAL PROPERTIES
Dentin shear bonding strength10.75MPa
Enamel shear bonding strength30.76MPa
Price for one screw
In Dental Gold Plated cross head:
04-001
High quality precision finish in a special lead free alloy, conical shaped. Thread made similar to that of a modern self-tapping screw. Gold plated screw posts electrolytically plated with a thick layer of 24 K gold.
All screw posts the same
size Nr 1, 2, 3, 4, 5, 6
S/short M/medium L/long
XL/extra long only Nr 4 & 6
Made in Switzerland
Spatulas are used to mix dental materials such as cement, wax or impression material. These spatulas can also be used to load the material needed into the dental preparation.
Straight spatula the handle is arabesquitic
Straight spatula, the handle is arabesquitic, of handling, flat and smooth.
Polishing kits for amalgam and precious alloys
The kits are available in contra angle or friction grip shank and contain all important instruments for all polishing steps up to high gloss.
Contents Cup: 3x Brownie, 2x Greenie, 1x Supergreenie Minipoint: 3x Brownie, 2x Greenie, 1x Supergreenie
The Brownie cups and midi-points are made with a coarse abrasive that is ideal for removing scratches and blemishes from the amalgam surface. The Greenie cups and midi-points are made with a medium abrasive that is used to smooth out the surface and create a polished finish. The Supergreenie cup and midi-point are made with a fine abrasive that is used to create a high gloss finish.
The polishing compounds in the Amalgam Polishing are impregnated into the rubber cups and midi-points. This means that there is no need to add additional polishing powder, which can make the polishing process messy and time-consuming. The polishing compounds are also water-soluble, which makes it easy to clean the instruments after use.
The Amalgam Polishing is a high-quality set of polishing instruments that is ideal for dentists who want to achieve a professional finish on their amalgam restorations. It is easy to use and provides consistent results. The kit is also affordable, making it a great value for the money.
Porcelain Etch 9% Buffered Hydrofluoric Acid
Waldent Procelain Etch is used to etch porcelain veneers, crowns, bridges, inlays, onlays, and fractured dental porcelain. Etch and a quality bonding resin, yields the highest bond strength to porcelain when compared with other porcelain bonding products.
Features:-
- Etch is easy to control and place
- Does not stain ceramic or composites
- One-minute etch
- Thixotropic – stays where placed
- Buffered formula
- Washes off easily
Packaging:-
- 1.2gm x Porcelain Etch
5ml
Total-Etch Adhesive
Bottle 5ml
Made in Germany
PREBOND-5th Generation Adhesive System is Light Curing hydrophilic universal bond.
Forms a very good bond between dentin and the composite and thereby reduces the formation of marginal gaps.PREBOND is an adhesive with outstanding adhesion to dentin and etched enamel. It improves adhesion between the composite and tooth surface.
PREBOND is one component dental universal adhesive for bonding dentin/enamel using adhesive restoration technique.It has an excellent adhesion value with a very high hydrophilic stability.The fluid is an easy flowing with excellent deep absorption into the retention thus enabling very high bond strenght while minimizing marginal gaps. PREBOND Light cure universal bond 5ml.
Indications
* It is cometable with all the composite type restorations
* For bonding the metal or amalgam restorations
* the treatment of the out surfaced root
* Composites and compemers
Physical Properties
Apperiance: low viscosity liquid without clear particles.
pH Value: 3-3,2
Dentin that is cured with light/Bonding strength to the Dentine : 30 mpa
Bonding Strength to the non- valuable metal: 20 mpa
Bonding Strength to the valuable metal: 24 mpa
Polimerization Time: 20 Seconds
Packaging Detail
PRD.100.02.02 1x5 ml bottle
