- Alpha-Pro With Varnish contains 5% sodium fluoride. - It is used in the treatment of dental and post-operative sensitivity. - Alpha-Pro Varnish when applied practically becomes invisible, unlike traditional varnishes that cause unsightly yellow coloring of the teeth. - Alpha-Pro Varnish sets immediately on contact with saliva, leaving a smooth, thin layer. - Patients can eat and drink two hours after treatment.
Gingival barrier, gum dam 1.5ml each
To protect the gums during Teeth Whitening, Dental Use
Gum dam is used to protect gums and the soft tissue from chemical agents, during Laser Teeth whitening or dental treatment.
Blue gingival protection barrier for dental use
- Easy to use syringe for precision application with a bib
- Cures within seconds and stays in place (Use LED machine lighting about 10-40 seconds)
- Simple post-treatment removal
Contains less than 0.1% hydrogen peroxide, zinc peroxide or other compounds and hydrogen peroxide
Allergy advice:
Do not use in cases of rubber/ latex allergy and nut allergy.
Do not ingest, for external use only.
DIRECTIONS
Remove the cap from the syringe (do not discard) and attach the syringe tip to the syringe.
Prime the tip by extruding a 1/4-inch line of the material, on a paper pad,
before using to ensure adequate dispensing of the material.
Apply a bead of Paint-On Dental Dam on gingival surface
surrounding the dentition you want to isolate.
Carefully manipulate to form a thin film of Paint-On Dental Dam
with the syringe tip or spread it with a sable brush.
Clean the syringe tip or brush with organic solvent before
any ambient light causes polymerization. Then, replace the cap.
Hold a light tip 1/2-inch (13 mm) away from the Paint-On Dental Gum Dam
Light cure for 5-60 seconds depending on the light used.
Repeat this procedure until the entire surface is cured.
Peel away the Paint-On Dental Dam using a dental tweezers or a similar instrument after you complete your dental procedure.
China
High paste contains a unique blend of polishing and cleaning agents designed for application during standard dental practice & hygiene procedures. High paste is for professional use only.
Application:-
High Paste is used for cleaning, plaque removal and polishing of tooth as a part of professionally administered prophylaxis treatment.
Compositions:-
High Paste is composed of Sodium Fluoride, Glycerine, and Silica in selected and controlled practical sizes in an aqueous flavoured base.
Shelf Life:-3 years from the date of Manufacturing.
Polishing paste
Made in Lithuania
jar 100 g
i-FASTE
Tooth Surface Polishing Paste
INDICATIONS
- To clean debris, plaque, calculus, stains, and other accretions from the teeth
- For the teeth surface preparation (cleaning and polishing) prior to restorations and fluoride treatment
- For recontouring, finishing and polishing the surface after restoration to restore normal contours, smooth margins, and to create a high luster shine, the overall appearance and longevity of the restoration itself
ADVANTAGES
- Simple to use
- Fresh taste
