Plastic instrument Gold Plated
Made in Pakistan
High quality
Some of the common uses of the Sigma Plastic instrument Gold Plated - 1pc include:
- Placing composite resin on teeth
- Carving composite resin to create a natural-looking restoration
- Finishing composite resin to a smooth surface
- Removing excess composite resin
The Sigma Plastic instrument Gold Plated - 1pc is a versatile and essential tool for dentists and dental hygienists. It is used in a variety of procedures to place, carve, and finish composite resin restorations.
Pakistan
Saddle Contoured Metal Matrices Universal Kit for Premolars
- 36 pcs
N 1.330 Saddle Contoured Metal Matrices.
Universal Kit for Premolars
36 pcs.:
small № 1.301(1) - 3 pcs.,
medium № 1.302(1) - 3 pcs.,
large № 1.303(1) - 3 pcs.,
small № 1.311(1) - 6 pcs.,
medium № 1.312(1) - 6 pcs.,
large № 1.313(1) - 6 pcs.,
small № 1.311(2) - 2 pcs.,
medium № 1.312(2) - 2 pcs.,
large № 1.313(2) - 2 pcs.,
small № 1.311(3) - 1 pcs.,
medium № 1.312(3) - 1 pcs.,
large № 1.313(3) - 1 pcs.,
small springclip № 1.003 - 1 pc.
There are matrices of 2 thicknesses:
• 0,050 mm
• 0,035 mm
Specify, please, the necessary type, e.g., 1.330 - 0,035 mm, otherwise you' ll receive matrices of the first type, i.e. 0,050 mm.
WARNING!!!
When operating with ring:
1) make sure of integrity of the ring and absence of rust on it;
2) avoid high-speed opening;
3) open the ring for width not more than 10 - 12 mm;
4) open the ring for necessary width outside the mouth before placing it on a tooth.
CLEANING AND STERILIZATION INSTRUCTIONS:
1) Submerge instruments in cleaning agent solution with neutral pH for 20 min;
2) Rinse the instruments thoroughly with purified water for 3-5 min;
3) Perform standard moist heat / steam sterilization procedure following the sterilizer instructions.
WARNING!!!
1) Do not use cleaning agents with high percentage of chlorine and cleaners containing oxalic acid;
2) Do not keep instruments in liquid medium for more than 3 hours.
Origin: Russia
• small with ledge (№ 1.0971) 3 pcs.
• small (№ 1.0972) 10 pcs.
• large (№ 1.0973) 5 pcs.
• large with ledge (№ 1.0974) 3 pcs.
• medium with ledge (№ 1.0975) 4 pcs.
• medium (№ 1.0976) 5 pcs.
• ring (standard) (№ 1.099) 1 pcs.
There are 4 types of matrices:
• 0,050 mm hard,
• 0,035 mm hard,
• 0,050 mm soft,
• 0,035 mm soft.
Specify, please, the necessary type, e.g., 1.198 - soft 0,035 mm,
otherwise you' ll receive matrices of the first type, i.e. hard 0,050 mm.
Origin: Russia
FOR 1:1 Temporary Crown & Light
Product description
Instruction:
Open the top of the dispenser and then pull the rack to reach the maximum.
Put into impression material cartridge, and lock it by the dispenser.
Promote the trigger to make the impression material come out smoothly from the cartidge After using, put the rack back to the original location.
Remove the cartridge, then to repeat the above operation.
Function for dental dispensing gun
No need Power and Air Pump.
It is completely operated by hand, leggiere-design and easy to be taken. It is used for catalyst with mixing impression materials, silica gel or self-solidifying compound resins etc. Two-component dispensing guns can avoid pollution when it is used for mixing adhesives, fast-occlusion silica gel and various impression materials.
