Restorative

- For temporary relief of localized dental pain.
- Combined with zinc oxide to form sedative dressing 

BENEFITS :

- Chemically pure with increased effectiveness .
- Forms a uniform paste consistency when mixed with zinc oxide.
- Form a sedative or lining under non composite resin when mixed with zinc oxide.

15 ml glass bottle with dispensing dropper

WOODPECKER i-LED Plus Curing Light from Woodpecker isergonomically designed to fit comfortably in the user’s hand. Using a constant power output this light has a cure time of 1 second for 2mm of resin, with a light intensity of up to 2300mw/ cm?.After the new upgrade, the wave band changes of iLED changes from a single blue light to blue-violet light which can cure all materials.

ADVANTAGES :-

Upgraded light intensity

• Two modes for option:With the maximum light intensity of 2300mw/cm2,Curing 2mm resin in 1s,Which makes it especially suitable for orthodontic brackets, porcelain veneers and post core adhesives.

Upgraded focused light output

• Unique woodpecker technology of focused light output reduces 55.87% light angle, allowing more concentrated energy and higher curing efficiency.

Upgraded wide spectrum

• The emission wavelength range of iLED plus wide spectrum, curing light is 385nm-515nm, mainly adding the wave band of 385nm-420nm.the additional band can better curing the resin materials containing new- style photo initiators such as TPO.For example, restoration materials such as Tetric N-ceram bulk fill (Ivoclar) & Amelogen plus (Ultradent).The additional wave band can also reduce the risk of resin shedding and incomplete curing.

Features :-

• Constant power output- born for teeth restoration
• 360 Degree curing- reach every angle
• Fluid design- better hand feeling
• 1 sec for curing- 2mm resin
• Wide spectrum
• High light intensity
• Focused light

TECHNICAL SPECIFICATIONS :-

• Dimensions: 25mm?25mm?240mm
• Net weight: 278g
• Power Input: 100V to 240V, 50Hz/60 Hz
• Wave length: 385nm-515nm
• Light intensity: 1000 mW/cm2~2500mW/cm2

PRECAUTIONS :-

• Please recharge the battery at least 4 hours before first time usage.
• In order to prevent cross-infection, it is forbidden to reuse the disposable sleeve.
• The top of the main unit can be turned 360 degrees to both left and right while it is forbidden to remove.
• During operation, the blue light should be aimed straightly at the composite resin to ensure the effect of solidification.
• Avoid aiming the blue light at eyes directly.
• Please use the power adapter and lithium battery which is designed and supplied by our company. It may cause potential dangers to operator and patient by using the power adapter and lithium battery which is designed and supplied by other manufacturers.
• It is forbidden to use metal or other conductors to touch the main unit and the charging point of pedestal because it may burn the internal circuit or make the lithium battery short circuit.
• Please recharge the battery in cool and ventilated room.
• It is forbidden to self-taking apart the battery, in order not to result in
  short-circuit or leakage.
• It is forbidden to extrude, shake or rock the battery. The Li-ion battery is forbidden to be in short-circuit situation and it is forbidden to put the

MAINTENANCE:-

• This equipment does not include the self-maintainable spare parts. The maintenance of this equipment should be taken by the appointed professional or special repair shop.
• Users can change the disposable sleeve and lithium battery. Please use accessory which is designed and supplied by our company, contract with the local dealer or our company if you want to buy. It may cause potential dangers to curing light or other damages which is designed and supplied by other manufacturers.
• The accessory of the product should be cleaned by clean water or neutral sterilized liquid. Do not soak. Do not use highly volatile and diffluent solvent to clean this equipment, which can cause the signs on the control panel to fade.
• Please clean the resin remained on the top of the main unit after using to avoid infecting the life-span or solidified effect.
• The device cannot be maintanenced during operation. And it is suggested to maintain it once a month. But sleeve is for one-time usage and no need for maintanance.

Packaging :-

• 1 x Light cure unit
• 1 x Charger
• 1 x Charger cord
• 1 x Instruction manual 

 Rubber Dam Clamps

1 pc .

Made in Pakistan

Anterior & Molar &Premolar

Pakistan Rubber Dam Clamps is listed in our Restorative Instruments range. Review the available options and specifications on this page before ordering. For compatibility or technical questions, contact Viking Dental Store.

Zinc polycarboxylate cement

powder Jar 30g & Liquid Bottle 15ml

Poly Zinc+ is a zinc polycarboxylate cement which chemically bond to the tooth structure.

Indications :

• Suitable for cementation of
• Crowns , bridges and orthodontics brackets.
• Cavity, lining under all restoration materials.
• Temporary filling and filling of deciduous teeth.

Benefits :

• Chemically bonds to tooth structure and metal appliances.
• Extremely low film thickness.
• Radiopaque.
• High adhesive strength.
• Minimal solubility in oral fluids.

Brand: Prevest

Origin: India

i-ZOE N

Resin Modified Zinc Oxide-Eugenol Cement

INDICATIONS

• Bases and linings under amalgams
• Bases and linings under glass ionomers
• Temporary fillings
• Temporary fixing crowns and bridges

ADVANTAGES

• High strength
• Quick setting
• Resin modified

6g

Self-Etch Adhesive

Bottle 6g

Made in Liechtenstein

Tetric N-Bond Universal

Tetric N-Bond Universal is a light-curing, single-component adhesive for direct and indirect bonding procedures and all etching techniques1. Take advantage of the exceptional potential of this product and discover how easy it will make your work in the future.

Advantages

• Universally suitable for direct and indirect bonding procedures and all etching protocols
• High bond strength (> 25 MPa) on wet and dry dentin
• Minimal risk of postoperative sensitivity due to the integrated desensitizing effect
• Efficient VivaPen delivery form provides almost 3 times more applications per ml compared to conventional bottle

Indications

• Direct-placed light-curing composite and compomer restorations.
• Direct-placed core build-ups with light-, self- and dual-curing composites.   
• Repair of fractured composite and compomer restorations. Adhesive cementation of indirect restorations with light- and dual-curing luting composites
• Sealing of prepared tooth surfaces before temporary/permanent cementation of indirect resto-rations.
• Desensitization of hypersensitive cervical areas

5ml
New seventh-generation bonding agent has an exclusive chemistry with unique dual adhesive monomers that deliver equal bond strength to enamel and dentin.

Features:

• Bond strengths comparable to leading multi-component brands
• Single coat for shorter working time
• Efficient 30 second application
• 5 µm film thickness
• HEMA-free
• Convenient unit dose, no mixing

5ml

FEATURE & BENEFIT

5th Generation Bonding System (2 bottles: Etch + Prime & Adhesive)One step priming & bonding

Superior bonding strength

Wet bonding type

APPLICATION

Bonding for direct composite, porcelain, composite, metal repair, set amalgam and indirect bonding procedures with Metacem adhesive resin cement

PHYSICAL PROPERTIES

Dentin shear bonding strength10.75MPa

Enamel shear bonding strength30.76MPa

• Light Curing Universal Hybrid Composite
• (4g)
  
• Germany

Applicatinon Zone

* Class III,IV and V restorations
* Class I and II restorations
* Inlay or onlay cases with direct or indirect method
* Custom Veneers hardened utside the mouth

Phsical Data

The treatment depth in:  40 sec. 4.5nm
Flexural Strength: 120Mpa
Diametric stretching  strength:    69Mpa
Pressure Strength: 400Mpa
Polimerization shrinkage rate:    %0.2
Bareol toughness: 68
Coefficient f the thermal extention: 32 umm-1K-1
Water Apsorption: 12ug/g
Solution in wate:r 1ug/g
Radiopasity: strong
Polishing High; shine

Dynamic Plus is indicated for class I, II, V of posterior teeth, class III, IV, V
of anterior teeth and cervical cavities (wedge shaped defect) involving root surfaces.
*Easy handling, non-sticky formula that won’t slump.
*Excellent wear resistance and superior performance at the margin.
*Resists chipping and fracturing for long-lasting restorations.
*Creamy consistency
*Great optical properties
*Simple technique
*Excellent polishability
*Long working time
*Suitable for all cavities in Anterior & Posterior teeth

Composition
Barium aluminosilicate (Average Particle Size: ≤1μm)
Fumed silica (Average Particle Size: 0.04μm)
Bis-GMA
Triethyleneglycol dimethacrylate
Others
The percentage by weight of total inorganic filler is ca.80>#br###Shelf Life:
*3 years from the production date

Syringe Size: 4g

Matrix band.

10 Matrices / Pack

Matrix Band - T Shape is listed in our Restorative Instruments range. Review the available options and specifications on this page before ordering. For compatibility or technical questions, contact Viking Dental Store.

Made In Pakistan

Amalgam Carrier - Pakistan is listed in our Restorative Instruments range. Review the available options and specifications on this page before ordering. For compatibility or technical questions, contact Viking Dental Store.

Saddle Contoured Metal Matrices.18 pcs.:

small № 1.311(1) - 6 pcs.,
medium № 1.312(1) - 6 pcs.,
large № 1.313(1) - 6 pcs.,
small springclip № 1.003 - 1 pc.

Matrices are available of two thicknesses - 0,050 mm and 0,035 mm.
Specify, please, the necessary type, e.g., 1.310 - 0,035 mm, otherwise you' ll receive matrices of the first type, i.e. 0,050 mm.

Origin: Russia

LITARK bonds extremely well with the cavity surfaces guaranteeing high non-permability and a mastication resistant stable filling. LITARK sets rapidly when in contact with saliva.

CHARACTERISTICS

Temporary filling cement, ready to use and extremely easy to apply.

 It doesn’t contain eugenol. The product is characterized by high plasticity. 

The improved viscosity ensures better workability, facilitating application. 

LITARK adheres extremely well with the cavity surfaces with no need to add any further retentions. 

The cavity does not need to be dried before application. All types of residues and other solutions must be completely removed from the cavity before applying the cement.

 LITARK sets quickly on contact with saliva. Litark low solubility ensures impermeable, completely neutral fillings resistant to mastication. Litark is easy to remove and does not leave residues.

undefined

Charisma Classic. Experience x Research = Microglass II effect.

Charisma Classic is the very first composite to offer the second generation of Microglass filler technology. We developed this new and enhanced technology in close cooperation with practitioners worldwide to meet your requirements for composite workability and natural brilliance. Single-shade layering techniques have never been this easy.

With Microglass II effect
What you see is what you get! As all refractive indices of our matrix and filler system have been optimally aligned, the new filler technology offers an intrinsic shade brilliance and increased colour adaption of up to 56%. For you that means:

• Easy single-shade layering techniques and more natural restorations
• Convenient shade selection and matching
• Easier masking of discolorations

Easy handling
Due to its creamy consistency Charisma Classic allows easy and fast modeling. And it comes with excellent finishing and polishing properties that facilitate a high surface lustre. In addition, the easy shade range permits a convenient shade selection and matching. Where else do you meet high quality and reliability standards with such ease?

Natural restorations from a state-of-the-art technology.

We put all our expertise and long-term experience into our goal to advance a product that has been on the dental market for over 20 years and has been used in millions of fillings by practitioners around the world.

The result is Charisma Classic, the very first composite to offer the second generation of Microglass filler technology. We developed this new and enhanced technology in close cooperation with practitioners worldwide – and made single-shade layering techniques much more easy.

What is the Microglass II effect?
Conventional composites often include highly dispersive Silicon dioxide (SiO2) to prevent sedimentation of fillers. But this usually leads to an extremely high refractive variance and a milky appearance of the restoration. That is why good colour adaption and a natural look are much more difficult to achieve with those composites.Charisma Classic contains approximately 61 % filler by volume with Barium Aluminium Fluoride glass. The new Microglass II filler technology does not need any pyrogenic SiO2 anymore and therefore offers an intrinsic shade brilliance and increased colour adaption of up to 56 %. All refractive indices of our matrix and filler system have been optimally aligned. Colour pigments ensure an intensified shade brilliance. The result: What you see is what you get!

Meet the benefits of the Microglass II effect.

• Easy single-shade layering techniques and more natural restorations: There’s a lot to gain from our second generation filler technology. The Microglass II effect has brought colour adaption to the next level. With Charisma Classic, you will experience a high shade brilliance. Getting the result that you want within the first layer has never been this easy.
• Convenient shade selection and match: Charisma Classic offers an easy shade range which contains the standard VITA shades and more intense opaque shades to easily mask discolorations. The shade guide consists of the Charisma Classic original material and not of acrylic. This assures colour fidelity between the shade taken and the restoration. Thanks to Microglass II, what you see is what you get!
• Mask discolorations more easily: More intense opaque shades allow easy masking of discolored teeth as well as amalgam tattoos and the use in smaller cavities. This, too, is made possible by the Microglass II technology.

Source: Prof. Giannini, Unicamp, Priacicaba, Brazil. Unpublished data. Data on file.

Charisma Classic shows an ideal colour match due to the Microglass II effect. In contrast, the colour match of easy single-shade layering techniques with conventional composites is often not satisfying.

Charisma Classic – Handle with ease.

We want to make natural restorations as easy as possible for you. So we have always put our efforts into shaping the Charisma handling properties to your convenience. Charisma Classic, a light curing, radio-opaque microhybrid composite, is no exception to that rule. From its application to the light curing, the handling of Charisma Classic is convincingly easy:

• Its creamy consistency allows easy and fast modelling.
• Excellent finishing and polishing properties facilitate a high surface lustre.
• The easy shade range permits a convenient shade selection and matching.
• Its radiopacity enables a safe and reliable diagnosis.

Ideal for easy single-shade layering techniques…

With Microglass® II we took Charisma to the next level of natural and long-lasting restorations. Colour adaption has become easy and reliable. Thanks to the refined filler technology, what you see is what you get.

…unless you are working on something more sophisticated?
The Charisma family also offers solutions for more complex cases. For multi-layering techniques we recommend Charisma Opal and Charisma Diamond. Both Charisma Opal and Charisma Diamond offer a wider range of shades in three different opacity levels for the creation of longlasting, nature-like restorations.

Extensive positive long-term experience and current studies.

The development of Charisma Classic was based on our long-term clinical experience with Charisma. Various internal and external studies have been conducted on Charisma Classic to ensure the same high quality and reliability for which its antecessor is famous for.

 MTA  Powder 

(0.25g)

Made in Egypt

MTA Powder - Keepers is listed in our Endodontic Supplies range. Review the available options and specifications on this page before ordering. For compatibility or technical questions, contact Viking Dental Store.

Single-Component Universal Dental Adhesive

Description:

• Strong adhesive material used for permanent cementation.

Package contains:

• 80g powder, 50 ml Liquid.
  Origin: Egypt

• Strong adhesive material used for crowns, bridges, inlays and posts. 

  50gm powder – 25ml Liquid

  
  Origin: Egypt

 5ml

Total-Etch Adhesive

Bottle 5ml

Made in Germany

PREBOND-5th Generation Adhesive System is Light Curing hydrophilic universal bond.
 
Forms a very good bond between dentin and the composite and thereby reduces the formation of marginal gaps.PREBOND is an adhesive with outstanding adhesion to dentin and etched enamel. It improves adhesion between the composite and tooth surface.

PREBOND  is one component dental universal adhesive for bonding dentin/enamel using adhesive restoration technique.It has an excellent adhesion value with a very high hydrophilic stability.The fluid is an easy flowing with excellent deep absorption into the retention thus enabling very high bond strenght while minimizing marginal gaps. PREBOND Light cure universal bond 5ml.

Indications
* It is cometable with all the composite type restorations
* For bonding the metal or amalgam restorations
* the treatment of the out surfaced root
* Composites and compemers

Physical Properties
Apperiance:  low viscosity liquid without clear particles.
pH Value: 3-3,2
Dentin that is cured with light/Bonding strength to the Dentine : 30 mpa
Bonding Strength to the non- valuable metal: 20 mpa
Bonding Strength to the valuable metal: 24 mpa
Polimerization Time: 20 Seconds

Packaging Detail
PRD.100.02.02 1x5 ml bottle

Pakistan

Anatomical Carver - Pakistan is listed in our Restorative Instruments range. Review the available options and specifications on this page before ordering. For compatibility or technical questions, contact Viking Dental Store.