No results found. Try different keywords.
Browse All ProductsNo results found. Try different keywords.
Browse All Products
Explore prosthetic dental supplies at Viking Store Egypt for crown, bridge and denture workflows, including impression materials, articulators, cements and lab essentials. Everything for fixed and removable prosthetics in one place.
Tokuyama Palfique Bond 1ml
Self-Etching Bonding System
Bottle 1ml
Made in Japan
PALFIQUE Bond has better operability, with the same high bond strength as the original TOKUYAMA BOND FORCE
Torch Aomai - Medium
TPC Dispenser Gun
FOR 1:1 Temporary Crown & Light
Instruction:
Open the top of the dispenser and then pull the rack to reach the maximum.
Put into impression material cartridge, and lock it by the dispenser.
Promote the trigger to make the impression material come out smoothly from the cartidge After using, put the rack back to the original location.
Remove the cartridge, then to repeat the above operation.
Function for dental dispensing gun
No need Power and Air Pump.
It is completely operated by hand, leggiere-design and easy to be taken. It is used for catalyst with mixing impression materials, silica gel or self-solidifying compound resins etc. Two-component dispensing guns can avoid pollution when it is used for mixing adhesives, fast-occlusion silica gel and various impression materials.
VDS Etch 37% Phosphoric Acid Etching Gel – 5g Syringe
Professional Dental Etching Gel
VDS Etch is a professional dental etching gel formulated with 37% phosphoric acid for precise conditioning of enamel and dentin surfaces before adhesive restorative and orthodontic procedures.
VDS Etch is designed to support consistent surface preparation by creating a clean and properly conditioned substrate for bonding agents, composite restorations, fissure sealants, and orthodontic adhesives.
Its blue gel consistency provides excellent visibility during placement, helping the clinician apply the material accurately while maintaining better control over the etching area.
Professional etching concentration used for enamel and dentin surface conditioning before adhesive dental procedures.
Thixotropic gel consistency supports accurate placement and helps reduce unwanted flow during application.
The blue shade allows clear visualization of the etched area, supporting better clinical control and accurate application.
Designed to rinse away efficiently after application, supporting a clean bonding surface before the next clinical step.
Clinical Applications
For enamel and dentin conditioning before composite placement.
Ideal before adhesive systems and bonding agents.
Supports surface preparation before sealant application.
Suitable before orthodontic bracket bonding procedures.
| Product Type | Dental Etching Gel |
| Active Ingredient | 37% Phosphoric Acid |
| Color | Blue |
| Packaging | 1 × 5g Syringe with Pre-bent Tips |
| Application | Enamel & Dentin Etching |
| Use | Professional Dental Use Only |
Apply the gel precisely to the target enamel or dentin surface.
Follow the recommended clinical etching protocol according to the case and material system used.
Rinse thoroughly with water until the gel is completely removed.
Proceed with the adhesive, restorative, sealant, or orthodontic bonding procedure.
Store in a cool, dry place away from direct sunlight. Keep the syringe closed when not in use and keep out of reach of children.
For professional dental use only. Use according to proper clinical protocol and avoid contact with soft tissues, eyes, and skin.
VDS Etch combines visibility, control, and professional etching performance in a convenient 5g syringe format.
Zhermack Indurent Gel Catalyst (60ml)
Advantages
FOR THE SURGERY:
Used with the same length as Oranwash VL, Oranwash L and Thixoflex M on the mixing pad
Total using versatility in the different impression techniques
Easily dispensing
FOR THE LABORATORY:
Versatility
Easily dispensing
Characteristics
Red gel for homogeneous mixing control
Single catalyst for all Zhermack clinical C-silicones (Zetaplus System) -including technical (Zetalabor and Titanium)
Zhermack Light Oranwash (140ml)
Characteristics
• High initial flowability and excellent rigidity after hardening for the putties
• Thixotropy for the washes
• High tear resistance
Advantages
• Excellent relation between rigidity and elasticity
• Ideal working time/setting time ratio
• High flowability and accuracy of wash materials
• Putty and wash materials with the same catalyst (one for Zetaplus System and one for Zetaflow System)
C-Silicones LIGHT
Package contains : 140 ml
Zhermack Zetaplus Condensation Kit
Very high viscosity C-Silicone for Two-stage technique or single-stage technique with two viscosities
Package: Zetaplus 900 ml + Oranwash L 140 ml + Indurent Gel 60 ml
• High initial flowability and excellent rigidity after hardening for the putties
• Thixotropy for the washes
• High tear resistance
• Excellent relation between rigidity and elasticity
• Ideal working time/setting time ratio
• High flowability and accuracy of wash materials
• Putty and wash materials with the same catalyst
Made in Italy
Zhermack Zetaplus Putty 900ml
Characteristics
• High initial flowability and excellent rigidity after hardening for the putties
• Thixotropy for the washes
• High tear resistance
Advantages
• Excellent relation between rigidity and elasticity
• Ideal working time/setting time ratio
• High flowability and accuracy of wash materials
• Putty and wash materials with the same catalyst (Indurent Gel)
Visit us @VikingStore
