Dental Student

Indicated for all classes of restorations, I-V, Beautifil II LS is a firm but easy handling, stackable, non-sticky universal composite that has been formulated to minimize polymerization shrinkage and resultant shrinkage stress. With superior durability and aesthetics, ideal for both anterior and posterior restorations, Beautifil II LS, delivers predictable clinical efficacy and maximum performance characteristics.

• Award-winning handling – stackable and non-sticky
• Polishes in an instant
• Sustained fluoride release/recharge with bioactive Giomer technology
• Great strength and high wear resistance
• Tooth-like aesthetics with natural fluorescence and chameleon effect
• Low volumetric shrinkage (0.85%) and shrinkage stress (2.72 MPa)

C-Bond Self-Etch

C-Bond Self-Etch is a self-etching, light-curing one-component bonding for adhesive restorations. The material contains methacrylate. Using C-Bond Self-etch saves time, as the application is in one step, without prior etching. It can be used in one step for direct restorations. If used with indirect restorations, prior etching is necessary, for example in the case of cementing metal or ceramic crowns to dentin or composite. Also suitable for sealing dentin but may not be used in proximity to the pulp.

How to use?

Step 1: Put one drop into a dispensing well

Step 2: Apply gently to the slightly humid cavity walls for 20 sec.

Step 3: Blow for 5 sec. with oil-free compressed air

Step 4: Cure for 10 sec. with halogen or LED polymerization lamp with light intensity 800 mW/cm².

Properties:

•Etching and bonding in only one step

•Provides safe adhesion of composite to enamel, dentin and lining materials.

•Good long-term results

Advantages:

•Time saving

•Safe adhesion

•Reduces marginal gaps

•Optimal adhesion to slightly humid surfaces

Very high viscosity C-Silicone for Two-stage technique or single-stage technique with two viscosities

Package: Zetaplus 900 ml + Oranwash L 140 ml + Indurent Gel 60 ml

CHARACTERISTICS

• High initial flowability and excellent rigidity after hardening for the putties

• Thixotropy for the washes

• High tear resistance

ADVANTAGES

• Excellent relation between rigidity and elasticity

• Ideal working time/setting time ratio

• High flowability and accuracy of wash materials

• Putty and wash materials with the same catalyst

Made in Italy 

CharmCore Dual-Cured Core Build-Up Composite

• Easy Application
• Dual Cured System (Light Curing 20 seconds)
• High compressive strength
• High flexural strength

CLIP RING R3 1.0:
Special reinforced material ensures  the appropriate strength and  elasticity; Autoclavable

• Midwest 4 hole connection
• 22,000 allowable max. speed (rpm)
• External (Vigor A65) coolant delivery 
  China
  

Pakistan

Pakistan

What does the product offer

- Pulp capping and pulpotomy
- Weeping canal
- Root resorption internally and externally
- Forming a hard tissue barrier (Apexification)
- Temporary root canal filling

Origin: Egypt

BMS temporary filling

Calcium sulphate and zinc oxide plastic temporary filling material that hardens quickly under the influence of saliva. 

Glass ionomer restorative self cure in handmix version for restoration of primary teeth, core build up

Product Benefits:

* High fluoride release.

* Low solubility.

* Translucent shade.

* Very low film thickness.

Indications:

* Cementation of inlays, onlays and crowns.

* Cementation of posts and screws.

* Attachment of metal orthodontic bands.

WOODPECKER i-LED Plus Curing Light from Woodpecker isergonomically designed to fit comfortably in the user’s hand. Using a constant power output this light has a cure time of 1 second for 2mm of resin, with a light intensity of up to 2300mw/ cm?.After the new upgrade, the wave band changes of iLED changes from a single blue light to blue-violet light which can cure all materials.

ADVANTAGES :-

Upgraded light intensity

• Two modes for option:With the maximum light intensity of 2300mw/cm2,Curing 2mm resin in 1s,Which makes it especially suitable for orthodontic brackets, porcelain veneers and post core adhesives.

Upgraded focused light output

• Unique woodpecker technology of focused light output reduces 55.87% light angle, allowing more concentrated energy and higher curing efficiency.

Upgraded wide spectrum

• The emission wavelength range of iLED plus wide spectrum, curing light is 385nm-515nm, mainly adding the wave band of 385nm-420nm.the additional band can better curing the resin materials containing new- style photo initiators such as TPO.For example, restoration materials such as Tetric N-ceram bulk fill (Ivoclar) & Amelogen plus (Ultradent).The additional wave band can also reduce the risk of resin shedding and incomplete curing.

Features :-

• Constant power output- born for teeth restoration
• 360 Degree curing- reach every angle
• Fluid design- better hand feeling
• 1 sec for curing- 2mm resin
• Wide spectrum
• High light intensity
• Focused light

TECHNICAL SPECIFICATIONS :-

• Dimensions: 25mm?25mm?240mm
• Net weight: 278g
• Power Input: 100V to 240V, 50Hz/60 Hz
• Wave length: 385nm-515nm
• Light intensity: 1000 mW/cm2~2500mW/cm2

PRECAUTIONS :-

• Please recharge the battery at least 4 hours before first time usage.
• In order to prevent cross-infection, it is forbidden to reuse the disposable sleeve.
• The top of the main unit can be turned 360 degrees to both left and right while it is forbidden to remove.
• During operation, the blue light should be aimed straightly at the composite resin to ensure the effect of solidification.
• Avoid aiming the blue light at eyes directly.
• Please use the power adapter and lithium battery which is designed and supplied by our company. It may cause potential dangers to operator and patient by using the power adapter and lithium battery which is designed and supplied by other manufacturers.
• It is forbidden to use metal or other conductors to touch the main unit and the charging point of pedestal because it may burn the internal circuit or make the lithium battery short circuit.
• Please recharge the battery in cool and ventilated room.
• It is forbidden to self-taking apart the battery, in order not to result in
  short-circuit or leakage.
• It is forbidden to extrude, shake or rock the battery. The Li-ion battery is forbidden to be in short-circuit situation and it is forbidden to put the

MAINTENANCE:-

• This equipment does not include the self-maintainable spare parts. The maintenance of this equipment should be taken by the appointed professional or special repair shop.
• Users can change the disposable sleeve and lithium battery. Please use accessory which is designed and supplied by our company, contract with the local dealer or our company if you want to buy. It may cause potential dangers to curing light or other damages which is designed and supplied by other manufacturers.
• The accessory of the product should be cleaned by clean water or neutral sterilized liquid. Do not soak. Do not use highly volatile and diffluent solvent to clean this equipment, which can cause the signs on the control panel to fade.
• Please clean the resin remained on the top of the main unit after using to avoid infecting the life-span or solidified effect.
• The device cannot be maintanenced during operation. And it is suggested to maintain it once a month. But sleeve is for one-time usage and no need for maintanance.

Packaging :-

• 1 x Light cure unit
• 1 x Charger
• 1 x Charger cord
• 1 x Instruction manual 

Meta Biomed
Made in Korea

Pkt of 50 pcs

0.4*21mm

Made in China

Vigor Low Speed HandPiece Kit (Air motor, Straight HandPiece, Angulated Low Speed Contra )

6g

Self-Etch Adhesive

Bottle 6g

Made in Liechtenstein

Tetric N-Bond Universal

Tetric N-Bond Universal is a light-curing, single-component adhesive for direct and indirect bonding procedures and all etching techniques1. Take advantage of the exceptional potential of this product and discover how easy it will make your work in the future.

Advantages

• Universally suitable for direct and indirect bonding procedures and all etching protocols
• High bond strength (> 25 MPa) on wet and dry dentin
• Minimal risk of postoperative sensitivity due to the integrated desensitizing effect
• Efficient VivaPen delivery form provides almost 3 times more applications per ml compared to conventional bottle

Indications

• Direct-placed light-curing composite and compomer restorations.
• Direct-placed core build-ups with light-, self- and dual-curing composites.   
• Repair of fractured composite and compomer restorations. Adhesive cementation of indirect restorations with light- and dual-curing luting composites
• Sealing of prepared tooth surfaces before temporary/permanent cementation of indirect resto-rations.
• Desensitization of hypersensitive cervical areas

5ml
New seventh-generation bonding agent has an exclusive chemistry with unique dual adhesive monomers that deliver equal bond strength to enamel and dentin.

Features:

• Bond strengths comparable to leading multi-component brands
• Single coat for shorter working time
• Efficient 30 second application
• 5 µm film thickness
• HEMA-free
• Convenient unit dose, no mixing

5ml

FEATURE & BENEFIT

5th Generation Bonding System (2 bottles: Etch + Prime & Adhesive)One step priming & bonding

Superior bonding strength

Wet bonding type

APPLICATION

Bonding for direct composite, porcelain, composite, metal repair, set amalgam and indirect bonding procedures with Metacem adhesive resin cement

PHYSICAL PROPERTIES

Dentin shear bonding strength10.75MPa

Enamel shear bonding strength30.76MPa

• Light Curing Universal Hybrid Composite
• (4g)
  
• Germany

Applicatinon Zone

* Class III,IV and V restorations
* Class I and II restorations
* Inlay or onlay cases with direct or indirect method
* Custom Veneers hardened utside the mouth

Phsical Data

The treatment depth in:  40 sec. 4.5nm
Flexural Strength: 120Mpa
Diametric stretching  strength:    69Mpa
Pressure Strength: 400Mpa
Polimerization shrinkage rate:    %0.2
Bareol toughness: 68
Coefficient f the thermal extention: 32 umm-1K-1
Water Apsorption: 12ug/g
Solution in wate:r 1ug/g
Radiopasity: strong
Polishing High; shine

Dynamic Plus is indicated for class I, II, V of posterior teeth, class III, IV, V
of anterior teeth and cervical cavities (wedge shaped defect) involving root surfaces.
*Easy handling, non-sticky formula that won’t slump.
*Excellent wear resistance and superior performance at the margin.
*Resists chipping and fracturing for long-lasting restorations.
*Creamy consistency
*Great optical properties
*Simple technique
*Excellent polishability
*Long working time
*Suitable for all cavities in Anterior & Posterior teeth

Composition
Barium aluminosilicate (Average Particle Size: ≤1μm)
Fumed silica (Average Particle Size: 0.04μm)
Bis-GMA
Triethyleneglycol dimethacrylate
Others
The percentage by weight of total inorganic filler is ca.80>#br###Shelf Life:
*3 years from the production date

Syringe Size: 4g

Matrix band.

10 Matrices / Pack